Skoda Octavia II 2004 Workshop Manual page 104

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
production date 11/2013, the generation V four-wheel drive clutch
is installed. Assignment ⇒ Electronic Catalogue of Original Parts
1 - Sealing ring
❑ for four-wheel drive
clutch
❑ Replace after disas‐
sembly
❑ coat with high-perform‐
ance oil for four-wheel
drive clutch before in‐
serting
2 - Four-wheel drive control
unit - J492-
❑ Removing and installing
⇒ "6.10 Removing and
installing control unit",
page 134
3 - Screw
❑ 2 pieces
❑ 9.5 Nm
4 - Sealing ring
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
❑ for output flange of the
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
rear final drive
❑ Replace
⇒ "4.3 Replacing gasket
ring for output flange of
the rear final drive",
page 85
5 - Propshaft flange
❑ Removing and installing
⇒ "4.3 Replacing gasket
ring for output flange of
the rear final drive",
page 85
6 - Nut
❑ for output flange of the
rear final drive
❑ slacken and tighten
❑ Replace after disassembly
❑ secure with locking agent - D 000 600-
❑ 210 Nm
7 - Screw
❑ 4 pieces
❑ gradually tighten crosswise
❑ 50 Nm
8 - Four-wheel drive clutch
❑ Removing and installing the four-wheel drive clutch
⇒ "6.8 Removing and installing four-wheel drive clutch", page 115
❑ Check ⇒ "6.3 Functional test of four-wheel drive clutch", page 105
9 - O-ring
❑ Pump for four-wheel drive clutch - V181-
❑ 2 pieces
❑ ∅ 43.5 mm
100
Rep. gr.39 - Final drive - rear differential
⇒ "4.3 Replacing gasket ring for output flange of the rear final drive", page 85
.