Skoda Octavia II 2004 Workshop Manual page 18

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
Four-wheel drive control unit - J492-
Pump for four-wheel drive clutch - V181-
Fitting location: pump for four-wheel drive clutch -2- is located on
the rear final drive, in front (right) area.
Accelerator pedal position sender - G79-
Fitting location: the accelerator pedal position sender - G79-
-arrow- is located in the foot controls.
5.1.3 Installation location overview - electrical components, generation V four-
wheel drive clutch, final drive 0BR, Yeti from 11/2013
In Yeti vehicles with rear final drive 0BR, generation IV four-wheel
drive clutch was installed up to production date 10/2013. From
production date 11/2013, the generation V four-wheel drive clutch
is installed. Assignment ⇒ Electronic Catalogue of Original Parts
14
Rep. gr.00 - Technical data
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.