Skoda Octavia II 2004 Workshop Manual page 90

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
Removing
DANGER
There is a risk that the vehicle will fall down off the lifting plat‐
form.
If the vehicle is not securely lashed, there is a risk of the vehicle
falling down from the lift platform.
– Secure the vehicle on both sides to the supporting arms of
the lift platform.
– Lash the vehicle on both sides to the supporting arms of the
lift platform using tensioning straps - T10038- .
1 - Tensioning strap - T10038-
NOTICE
Risk of damage to the decoupling element of the pre-exhaust
pipe.
The decoupling element must not be bent or kinked by more
than 10°.
– Do not load the decoupling element with tensile stress.
– Do not bend the decoupling element excessively.
– Loosen nuts of clamping sleeve -arrow- and slide it back‐
wards.
– Tie pre-exhaust pipe to the underfloor.
– Remove screws -1- of the pendulum support.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
86
Rep. gr.39 - Final drive - rear differential