Skoda Octavia II 2004 Workshop Manual page 97

1 - Screw
❑ 4 pieces
❑ 50 Nm
2 - Four-wheel drive clutch
❑ with control unit
⇒ "6.2 Summary of com‐
ponents - four-wheel
drive clutch control unit",
page 102
❑ Summary of compo‐
nents
⇒ "6.1.2 Summary of
components - genera‐
tion II four-wheel drive
clutch, Octavia II",
page 94
❑ Inspect proper opera‐
tion
⇒ "6.3 Functional test of
four-wheel drive clutch",
page 105
❑ Removing and installing
⇒ "6.8 Removing and in‐
stalling four-wheel drive
clutch", page 115
❑ Disassembling and as‐
sembling
⇒ "6.9 Disassembling
and assembling cou‐
pling", page 128
3 - O-ring
❑ Removing and installing
⇒ "6.8 Removing and in‐
stalling four-wheel drive
clutch", page 115
❑ Replace after disas‐
sembly
❑ insert after moistening with oil for four-wheel drive clutch
4 - Final drive
❑ Summary of components
❑ Removing and installing
Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
⇒ "2.1 Summary of components - final drive", page 63
⇒ "2.2 Removing and installing the rear final drive", page 65
Propshaft and rear final drive - Edition 10.2018
93
6. Four-wheel drive clutch