Skoda Octavia II 2004 Workshop Manual page 101

1 - Screw
❑ 4 pieces
❑ 50 Nm
2 - Four-wheel drive clutch
❑ Summary of compo‐
nents
⇒ "6.1.4 Summary of
components - genera‐
tion IV four-wheel drive
clutch, Octavia II, Su‐
perb II, Yeti, up to
10/2013", page 98
❑ with control unit
⇒ "6.2 Summary of com‐
ponents - four-wheel
drive clutch control unit",
page 102
❑ Inspect proper opera‐
tion
⇒ "6.3 Functional test of
four-wheel drive clutch",
page 105
❑ Removing and installing
⇒ "6.8 Removing and in‐
stalling four-wheel drive
clutch", page 115
❑ Disassembling and as‐
sembling
⇒ "6.9 Disassembling
and assembling cou‐
pling", page 128
3 - O-ring
❑ Removing and installing
⇒ "6.8 Removing and in‐
stalling four-wheel drive
clutch", page 115
❑ Replace after disassembly
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
❑ insert after moistening with high-performance oil for four-wheel drive clutch
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
4 - Final drive
❑ Summary of components
❑ Removing and installing
Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
⇒ "2.1 Summary of components - final drive", page 63
⇒ "2.2 Removing and installing the rear final drive", page 65
Propshaft and rear final drive - Edition 10.2018
97
6. Four-wheel drive clutch