Skoda Octavia II 2004 Workshop Manual page 103

❑ The cover must never be opened, risk of injuries!
11 - O-ring
❑ Replace after disassembly
❑ 2 pieces
❑ ∅ 34 mm
❑ for pump for four-wheel drive clutch - V181-
❑ coat with oil for four-wheel drive clutch before inserting
12 - Pump for four-wheel drive clutch - V181-
❑ Removing and installing
⇒ "6.7.2 Removing and installing generation IV four-wheel drive clutch pump, final drive 0BR, Octavia II,
Superb II, Yeti, up to 10/2013", page 112
13 - Screw
❑ 6 Nm
6.1.5 Summary of components - generation V four-wheel drive clutch , final drive
0BR, Yeti from 11/2013
In Yeti vehicles with rear final drive 0BR, generation IV four-wheel
drive clutch was installed up to production date 10/2013. From
Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
Propshaft and rear final drive - Edition 10.2018
99
6. Four-wheel drive clutch