Audi TT 2007 Workshop Manual page 85

❑ Different bolts according to version
❑ Renew
17 - Cover for gear oil pump
❑ With gasket
❑ Renew
❑ Removing and installing
18 - Bolt
❑ Tightening sequence
❑ 4 x
❑ Different bolts according to version
❑ Renew
24 - Guard plate
❑ Depending on version
25 - Bolt
❑ 32 Nm
❑ 4 x
Tightening sequence for oil pan
– Tighten bolts -arrows- diagonally in stages.
• 16 Nm
Mechatronic unit for direct shift gearbox -J743- ; tightening se‐
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
quence
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Tighten bolts in the sequence -1 ... 10- in 2 stages as follows:
1. Tighten bolts to 5 Nm.
2. Turn bolts 90° further.
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
⇒ "1.5 Removing and installing gear oil pump", page 90
⇒ page 82
1. Oil pan, mechatronic unit, gear oil pump - exploded view
Audi TT 2007 ➤
81