Removing And Installing Gearbox Mounting - Audi TT 2007 Workshop Manual

8.1

Removing and installing gearbox mounting

Special tools and workshop
equipment required
♦ Support bracket -10 - 222
A-
♦ Hooks -10 - 222 A /10-
♦ Engine support bracket, ba‐
sic set -T40091-
♦ Engine support bracket,
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
supplementary set -
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
T40093-
with respect to the correctness of information in this document. Copyright by AUDI AG.
Removing
Proceed as follows:
– Unplug electrical connector -3- from air mass meter -G70- .
– Release clamps -1 and 2- and disconnect air intake hose from
air mass meter -G70- .
– Unbolt front intake duct from lock carrier -4-.
– Remove engine cover panel.
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
Audi TT 2007 ➤
8. Assembly mountings - exploded view
61