Audi TT 2007 Workshop Manual page 28

Audi TT 2007 ➤
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
Gearbox input speed sender -G182- / oil temperature sender for
multi-plate clutch -G509-
Fitting location: the gearbox input speed sender -G182- and
clutch temperature sender -G509- -item A- are bolted to the gear‐
box housing below the mechatronic unit for direct shift gearbox -
J743- .
♦ Checked via self-diagnosis
⇒ "1.4 Removing and installing gearbox input speed sender G182
and clutch temperature sender G509 ", page 89
Selector lever -E313- with tiptronic switch -F189- , switch for se‐
lector lever locked in position P -F319-
Fitting location: the selector lever -E313- with tiptronic switch -
F189- and switch for selector lever locked in position P -F319- is
integrated in the printed circuit -B- of the selector mechanism.
These components cannot be renewed separately.
♦ Checked via self-diagnosis
Selector lever -E313- with tiptronic switch -F189- and switch for
selector lever locked in position P -F319- can only be removed
and installed together with selector mechanism
Selector lever position display -Y6-
Fitting location: integrated into instrument cluster
Note
Selector lever position indicator can only be renewed together
with instrument cluster.
If the selector lever position indicator flashes or lights up, please
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
refer to safety functions of gearbox control unit
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Removing and installing instrument cluster ⇒ Rep. Gr. 90
Selector lever display illumination bulb -L101-
Fitting location: in trim for selector lever boot -1-.
♦ Is checked via self-diagnosis
Removing and installing selector lever display illumination bulb -
L101- ⇒ page 28
24
Rep. Gr.34 - Controls, housing
.
⇒ page 33 .
⇒ page 5 .