Installing
•
Tightening torques
⇒ page 59
Installation is carried out in reverse sequence; note the following:
– First secure pendulum support to gearbox -arrow B- and
-arrow C-, then on subframe -arrow A-.
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
8. Assembly mountings - exploded view
65