Repair Instructions - Audi TT 2007 Workshop Manual

Audi TT 2007 ➤
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
7

Repair instructions

Proper tools and the maximum possible care and cleanliness are
essential for satisfactory gearbox repairs. The usual basic safety
precautions also naturally apply when carrying out repair work.
A number of generally applicable instructions for the various re‐
pair procedures are summarised here. They apply to the work
described in this Manual.
Guided fault finding, vehicle self-diagnosis and testing system
♦ Before servicing the gearbox, the exact cause of the failure
must be determined using the functions "Guided Fault Find‐
ing", "Vehicle Self-diagnosis" and "Test Instruments" ⇒ Vehicle
diagnosis, testing and information system VAS 5051.
Special tools
For a complete list of special tools used in this Workshop Manual
⇒ "Special tools, Workshop equipment"
Gearbox
♦ Do not run the engine or tow the vehicle with the oil pan re‐
moved or when there is no gear oil in the gearbox.
♦ When installing a replacement gearbox, check the gear oil
level and top up as required
⇒ page 3 ; specification ⇒ Parts catalogue .
♦ When installing gearbox, ensure that dowel sleeves are fitted
correctly.
8
Rep. Gr.00 - Technical data
⇒ page 66 : capacities
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.