Tightening Torques (Installing Gearbox) - Audi TT 2007 Workshop Manual

– When installing air intake hoses with plug-in connections,
make sure retaining clip -arrow- snaps onto retaining lug -A-.
– Observe correct procedure after connecting battery ⇒ Rep.
Gr. 27 .
– Adjust selector lever cable
– Check gear oil level and top up as required
– Check coolant level ⇒ Rep. Gr. 19 .
5.1

Tightening torques (installing gearbox)

Tightening torques
Note
Tightening torques apply only to lightly greased, oiled,
♦
phosphated or black-finished nuts and bolts.
Additional lubricant such as engine or gear oil may be used,
♦
but do not use graphite lubricant.
Do not use parts which have been degreased.
♦
Tolerance for tightening torques ±15%.
♦
Securing direct shift gearbox to engine
Item
1, 3, 6
5
7, 8
9
10
A
Note
-Items 2 and 4- can be disregarded.
• Additional tightening torques
⇒ "8 Assembly mountings - exploded view", page 59
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
⇒ page 40 .
⇒ page 66
Bolt
M12x55
M12x65
M10x50
M10x45
M12x70
Dowel sleeves for centralising
.
Nm
80
80
40
40
80
.
Audi TT 2007 ➤
55
5. Installing gearbox