Installation - Omron CompoNet MX2 Series User Manual

2 CompoNet Communications Unit Mounting and Wiring
2-2

Installation

Installation and Storage
Do not store or use the CompoNet Communications Unit in the following environment:
• Locations subject to direct sunlight
• Locations subject to ambient temperatures outside the range specified in the specifications
• Locations subject to relative humidity outside the range specified in the specifications
• Locations subject to condensation as the result of severe temperature fluctuations
• Locations subject to corrosive or flammable gases
• Locations near flammable materials
• Locations subject to dust, salt spray, or iron powder
• Locations subject to water, oil, or chemical splashes
• Locations subject to direct shock or vibration
Transportation, Installation, and Wiring
• Do not drop or apply strong impact on the product. Doing so may result in damaged parts or malfunc-
tion.
• When transporting the inverter with a mounted CompoNet Communications Unit, do not hold the
CompoNet Communications Unit.
• Do not remove the cover of the CompoNet Communications Unit. Tighten all unit fixation screws to
the specified torque.
• Install an appropriate stopping device to ensure safety. In particular, if configured to operate continu-
ously even in the event of a communications error, the inverter may not stop, resulting in equipment
damage.
2 - 6
Do not attempt to remove the terminal block cover or disconnect and reconnect the CompoNet Communications
Unit during power on or within 10 minutes after power off.
Doing so may result in severe injury due to electric shock.
Inverters contain high voltage parts and short-circuits may sometimes cause product damage or property
damage. Measures must be taken to prevent chips, lead-wire pieces, or other metal waste from entering
the product, for example, by installing a cover.
Do not attempt to disassemble, repair, or modify the CompoNet Communications Unit.
Doing so may result in injury.
DANGER
Caution
CompoNet Communications Unit User's Manual (I582-E1)