Omron CompoNet MX2 Series User Manual page 150

6 Troubleshooting
3
Remove the grounding cable of inverter.
4
Remove the CompoNet Communications Unit by
the indicated step.
Be careful not to stress the flat cable.
(a) Push up the CompoNet Communications Unit
to have a space under the bottom.
(b) While pushing it up, draw out the CompoNet
Communications Unit to the near side.
5
Remove the inverter connection PCB by holding
at the indicated locations.
6 - 16
CompoNet Communications Unit User's Manual (I582-E1)
G
(b) Draw out the
bottom
(a) Push up