Omron CompoNet MX2 Series User Manual page 55

7
Insert the CompoNet Communications Unit fixation
screw into the hole shown in the right figure, and
tighten it to fix the Unit.
Be careful not to overtighten the screw.
8
Connect the grounding cable of the CompoNet
Communications Unit to the ground terminal of the
inverter.
Make sure that the ground terminal is marked with
grounding symbol.
The position of grounding symbol differs depending on
the capacity of inverter. The figure is just an example.
9
Reinstall the terminal cover and tighten the two
screws to fix it in position.
Reinstall the terminal cover under the CompoNet Com-
munications Unit onto the inverter (B).
Tighten the two screws (A).
CompoNet Communications Unit User's Manual (I582-E1)
2 CompoNet Communications Unit Mounting and Wiring
G
B
A
A
2
2 - 13