Omron CompoNet MX2 Series User Manual page 92

3 Network Startup
Editing Device Parameters Using CX-Drive
Double-clicking Parameter Editor in the project opens a window in which all inverter parameters are
listed (in ascending order).
You can edit inverter parameters in this window.
To upload/download inverter parameters, use the Transfer buttons in the toolbar.
• Double-click each folder under Parameter Editor in the Workspace to display only those parameters
associated with it.
• Edit the value set for each parameter in the Value field of the parameter list.
• When a parameter is selected, the functional description of that parameter is displayed in the upper
area.
• At the left end of the parameter list, the state of each parameter value is displayed. You can display
only the parameters in the same state. A parameter is in one of the three states: Not default, Different
from the inverter, or Invalid.
• You can selectively transfer only the required parameter(s) to the inverter.
3 - 34
CompoNet Communications Unit User's Manual (I582-E1)