Omron CompoNet MX2 Series User Manual page 87

2
In the New Drive window, select the Drive Type of the inverter and the Option Board Type.
In the [Drive Type] section, select the inverter series and click the [Settings] button to the right.
In the Drive Type Settings window, select the Installation type/Option, Voltage Class, and Maxi-
mum Motor Capacity and, in the Option Board Type section, select CRT (CompoNet Communi-
cations Unit).
After selecting, click the OK button to close the Drive Type Settings window.
3
Next, in the New Drive window, select the type of connection to the inverter.
In the [Connection Type] section, select "Via PLC (CompoNet)" and click the [Settings] button to
the right.
On the [Network] tab, select the Slave Unit Address. You do not need to set the Master Unit
Address.
CompoNet Communications Unit User's Manual (I582-E1)
3 Network Startup
3 - 29
3