Omron CompoNet MX2 Series User Manual page 85

Multi-function Input Selection 1 to 8 (C001 to C008)
1st Frequency Upper Limit (A061)
1st Frequency Lower Limit (A062)
Output Frequency Setting (F001),
1st Multi-step Speed Reference 0 (A020)
Output Frequency Setting (F001),
1st Multi-step Speed Reference 0 (A020)
1st Frequency Lower Limit (A062)
Starting Frequency (B082)
Starting Frequency (B082)
Starting Frequency (B082)
Starting Frequency (B082)
Output Frequency Setting (F001),
1st Multi-step Speed Reference 0 (A020)
Multi-step Speed Reference 1 to 15 (A021 to A035)
Free V/f Frequency 7 (B112)
Free V/f Frequency 7 (B112)
Free V/f Frequency 7 (B112)
2nd Frequency Upper Limit (A261)
2nd Frequency Lower Limit (A262)
Output Frequency Setting (F001),
2nd Multi-step Speed Reference 0 (A220)
Output Frequency Setting (F001),
2nd Multi-step Speed Reference 0 (A220)
2nd Frequency Lower Limit (A262)
Starting Frequency (B082)
Starting Frequency (B082)
Starting Frequency (B082)
Output Frequency Setting (F001),
2nd Multi-step Speed Reference 0 (A220)
Free V/f Frequency 7 (B112)
Free V/f Frequency 7 (B112)
Free V/f Frequency 7 (B112)
*1 The process will be terminated abnormally if the same set value exists in Multi-function input selection 1 to 8.
The process will also be terminated abnormally if, when setting values in the order of Multi-function input selec-
tion 1 to 8, the value already set for a latter parameter is set for a preceding parameter.
*2 The process will be terminated if the frequency set for F001, A020, A220, or A021 to A035 is within the fre-
quency range set for Jump frequency.
CompoNet Communications Unit User's Manual (I582-E1)
Restrictions between Parameters
= Multi-function Input Selection 1 to 8 (C001 to
C008)
> 1st Maximum Frequency (A004)
> 1st Maximum Frequency (A004)
> 1st Maximum Frequency (A004)
> 1st Frequency Upper Limit (A061)
> Output Frequency Setting (F001),
1st Multi-step Speed Reference 0 (A020)
> 1st Frequency Upper Limit (A061)
> 1st Frequency Lower Limit (A062)
> Output Frequency Setting (F001),
1st Multi-step Speed Reference 0 (A020)
> Jogging Frequency (A038)
=
Jump Frequency
(A063/A065/A067 ± A064/A066/A068)
=
> 1st Frequency Upper Limit (A061)
> 1st Frequency Lower Limit (A062)
> Output Frequency Setting (F001),
1st Multi-step Speed Reference 0 (A020)
> 2nd Maximum Frequency (A204)
> 2nd Maximum Frequency (A204)
> 2nd Maximum Frequency (A204)
> 2nd Frequency Upper Limit (A261)
> Output Frequency Setting (F001),
2nd Multi-step Speed Reference 0 (A220)
> 2nd Frequency Upper Limit (A261)
> 2nd Frequency Lower Limit (A262)
> Output Frequency Setting (F001),
2nd Multi-step Speed Reference 0 (A220)
=
Jump Frequency
(A063/a065/a067 ± A064/a066/a068)
> 2nd Frequency Upper Limit (A261)
> 2nd Frequency Lower Limit (A262)
> Output Frequency Setting (F001),
2nd Multi-step Speed Reference 0 (A220)
3 Network Startup
*1
*1
*2
3
3 - 27