Omron CompoNet MX2 Series User Manual page 102

4 Remote I/O
Precautions for Safe Use
For safety reasons, the FW, RV, and RS command must be output after the cause of fault/trip
is removed.
Extended Speed and Acceleration Control
Assembly ID: 111 Dec (6F hex)
 Input Format (CS/CJ-series ← Inverter)
Word Byte
No. No.
n 0
1
n + 1 2
3
n + 2 4
5
n + 3 6
7
 Input Bit/Data Details
Name
FWR During forward
operation
RVR During reverse
operation
AL Alarm output
FA1 Constant speed
reached
MI1 to Multi-function Input
MI7 Monitor
MI8 Multi-function Input
Monitor
CFN Ctrl. from Net
RFN Ref. from Net
FWT Forward Rotation
Terminal Input
Monitor
4 - 8
bit 7 bit 6 bit 5
MI3 MI2 MI1
Rotation Speed Monitor (Low byte)
Rotation Speed Monitor (High byte)
Output Current Monitor (Low byte)
Output Current Monitor (High byte)
RFN CFN FWT
0: During reverse run/Stopping
1: During forward run
0: During forward run/Stopping
1: During reverse run
0: Normal
1: Fault/Trip
0: Accelerating or decelerating
1: Frequency agree
Monitors multi function inputs S1 to S7
0: OFF
1: ON
Monitors multi function inputs S8
0: OFF
1: ON
0: Rotation Speed Reference follows the setting of parameter A001; Accelera-
tion/Deceleration Time follows the setting of parameter F002/F003.
1: CompoNet reference
0: Follow the setting of parameter A001.
1: CompoNet reference
Monitors the forward rotation command terminal state.
0: OFF
1: ON
Bit Allocation
bit 4 bit 3 bit 2
FA1 – AL
Drive Status Detail
Trip Cause
MI8 MI7 MI6
Description
CompoNet Communications Unit User's Manual (I582-E1)
bit 1 bit 0
RVR FWR
MI5 MI4