Mounting Procedure Of Compenet Communications Unit On Rx-Series Inverter - Omron CompoNet MX2 Series User Manual

2 CompoNet Communications Unit Mounting and Wiring
Precautions for Correct Use Precautions for Correct Use
Some inverter models do not include a screw for the grounding cable. Please supply the rec-
ommended screw, lock-washer, and washer to attach the grounding cable.
• Ground cable screw selection - MX2-series
3-phase 200 V 5.5 to 7.5 kW
3-phase 400 V 5.5 to 7.5 kW
3-phase 200 V 11 to 15 kW
3-phase 400 V 11 to 15 kW
Additional Information
For how to remove the CompoNet Communications Unit, refer to 6-6 Removing CompoNet
Communications Unit on page 6-13.
2-2-2 Mounting Procedure of CompeNet Communications Unit on
RX-series Inverter
[Preparation]
• Before use, cut the FG cable into an appropriate length for the distance to the inverter's ground termi-
nal and the size of terminal block, and crimp the crimp terminal.
• For the position of ground terminal and the size of terminal block, refer to Arrangement of Main Cir-
cuit Terminal Block and External Dimensions in the user's manual for MX2 or RX-V1 Inverters.
1
Remove the following parts from the
RX-series Inverter:
A. Digital Operator
B. Spacer cover
C. Terminal cover
D. Front cover
E. Operator connector
Remove the operator connector (E) only if you
connect the LED operator via a cable.
2 - 10
Inverter Model
M4 x 6
M5 x 6
Grounding Cable Attachment Screw
D
A
B
CompoNet Communications Unit User's Manual (I582-E1)
E
C