Control Supervisor Object (Class 29 Hex - Omron CompoNet MX2 Series User Manual

Appendices
A-2-2

Control Supervisor Object (Class 29 hex)

Supported Service Codes
Table A-19 Control Supervisor Object - Supported Service Codes
Service Code No. (hex)
0E
10
Object Details
Table A-20 Control Supervisor Object - Object Details
Instance Attribute
(hex) (hex)
01 03
04
05
06
07
08
09
0A
0B
0C
0D
Additional Information
The comparison between the inverter Error/Trip codes and the CIP Fault/Warning codes is
shown in Table A-20.
A - 12
Reads Attribute data.
Writes Attribute data.
Name Description
Forward/ 0: Stop
Stop 1: Forward
Reverse/ 0: Stop
Stop 1: Reverse
Net Control 0: Follow the setting of param-
eter A002.
1: CompoNet reference
State Drive status
During For- 0: Stop
ward Run 1: During forward run
During 0: Stop
Reverse 1: During reverse run
Run
Inverter 0: Not ready
Ready 1: Ready
Fault 0: Normal
1: Fault
Alarm 0: Normal
1: Alarm
Fault Reset Resets the Fault/Trip state of
the inverter when 1 is written.
Fault Code Fault/Trip state code
Service Description
Setting
Default
Range
---- 0
---- 0
---- 0
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- 0
---- ----
CompoNet Communications Unit User's Manual (I582-E1)
Read Write Size
Yes Yes BOOL
Yes Yes BOOL
Yes Yes BOOL
Yes No UINT
Yes No BOOL
Yes No BOOL
Yes No UINT
Yes No BOOL
Yes No BOOL
Yes Yes BOOL
Yes No UINT