Machine Control Panel Menu - Siemens SINUMERIK 840D sl Universal Operating Manual

Handheld terminal for multi-touch-operation
15.2 HT 10
Virtual keyboard
A virtual keyboard is available for the easy entry of values.
Changing the channel
• You are able to switch the channel by touch in the status display:
– In the Machine operating area (large status display), by touch operation of the channel
– In the other operating areas (no status display), by touch operation of the channel display
• The "1... n CHANNEL" softkey is available in the machine control panel menu that can be
reached via the user menu key "U".
Operating area switchover
You display the operating area menu by touching the display symbol for the active operating
area in the status display.
Handwheel
The HT 10 is equipped with a handwheel.
If you are using an HT 10, then you can traverse your machine axes via the handwheel.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Further information
Additional information about connecting, commissioning and configuring user-specific keys is
provided in the Handheld Terminal HT 10 Equipment Manual.
15.2.2

Machine control panel menu

You select keys from the machine control panel which are reproduced by the software by touch
operation of the relevant softkeys.
See Section "Controls on the machine control panel" for a description of the individual keys.
Note
PLC interface signals that are triggered via the softkeys of the machine control panel menus are
edge triggered.
Showing and hiding
The user menu key "U" displays the CPF softkey bar (vertical softkey bar) and the user softkey bar
(horizontal softkey bar).
396
display in the status display.
in the screen headers (yellow field).
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal