Siemens SINUMERIK 840D sl Universal Operating Manual page 33

Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
<SELECT>
Switches between several specified options in selection lists and in
selection boxes.
Activates checkboxes.
In the program editor and in the program manager, selects a pro‐
gram block or a program.
<SELECT> + <CTRL>
When selecting table rows, switches between selected and not se‐
lected.
<SELECT> + <SHIFT>
Selects in selection lists and in selection boxes the previous entry or
the last entry.
<END>
Moves the cursor to the last entry field in a window, to the end of a
table or a program block.
Selects the last entry in selection lists and in selection boxes.
<END> + <SHIFT>
Moves the cursor to the last entry.
Selects a contiguous selection from the cursor position up to the end
of a program block.
<END> + <CTRL>
Moves the cursor to the last entry in the last line of the actual column
or to the end of a program.
<END> + <CTRL> + <SHIFT>
Moves the cursor to the last entry in the last line of the actual column
or to the end of a program.
Selects a contiguous selection from the cursor position up to the end
of a program block.
<BACKSPACE>
• Editing box
Deletes a character selected to the left of the cursor.
• Navigation
Deletes all of the selected characters to the left of the cursor.
<BACKSPACE> + <CTRL>
• Editing box
Deletes a word selected to the left of the cursor.
• Navigation
Deletes all of the selected characters to the left of the cursor.
<TAB>
• In the program editor, indents the cursor by one character.
• In the program manager, moves the cursor to the next entry to
the right.
Fundamentals
3.2 Operator panel fronts
33