Siemens SINUMERIK 840D sl Universal Operating Manual page 188
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Machining the workpiece
7.14 Displaying status of synchronized actions
Procedure
...
188
1.
Select the "Machine" operating area.
2.
Press the <AUTO>, <MDA> or <JOG> key.
3.
Press the menu forward key and the "Synchron." softkey.
The "Synchronized Actions" window appears.
You obtain a display of all activated synchronized actions.
4.
Press the "ID" softkey if you wish to hide the modal synchronized actions
in the automatic mode.
- AND / OR -
Press the "IDS" softkey if you wish to hide static synchronized actions.
- AND / OR -
Press the "Blockwise" softkey if you wish to hide the non-modal synchron‐
ized actions in the automatic mode.
5.
Press the "ID", "IDS" or "Blockwise" softkeys to re-display the corresponding
synchronized actions.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
