Siemens SINUMERIK 840D sl Universal Operating Manual page 112
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Setting up the machine
5.5 Zero offsets
Note
Settings for rotation, scaling and mirroring are specified here and can only be changed here.
Tool details
You can display the following details for the tool and wear data for tools:
• TC
• Adapter dimension
• Length / length wear
• EC setup correction
• SC sum correction
• Total length
• Radius / radius wear
Procedure
112
You can also change the display of the tool correction values between the Ma‐
chine Coordinate System and the Workpiece Coordinate System.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Zero offset" softkey.
3.
Press the "Active", "Base" or "G54...G599" softkey.
The corresponding window opens.
4.
Place the cursor on the desired zero offset to view its details.
5.
Press the "Details" softkey.
A window opens, depending on the selected zero offset, e.g. "Zero Offset
- Details: G54 to G599".
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
