Deleting Multitool; Loading And Unloading Multitool - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Tool management
12.15 Working with multitool
12.15.5
Deleting multitool
Procedure
12.15.6
Loading and unloading multitool
Procedure
Loading a multitool into the magazine
Loading a multitool into a magazine
314
1.
The tool list is opened.
2.
Position the cursor on the multitool that you wish to delete.
3.
Press the "Delete multitool" softkey.
The multitool with all of the tools that are located in it is deleted.
1.
The tool list is opened.
2.
Position the cursor at the multitool that you wish to load into the
magazine.
3.
Press the "Load" softkey.
The "Load on ..." window opens.
The field "... Locat." is initialized with the number of the first empty
magazine location.
4.
Press the "OK" softkey if you want to load the multitool to the rec‐
ommended empty location.
- OR -
Enter the location number you require and press the "OK" softkey.
The multitool together with the tools in it is loaded to the specified
magazine location.
2.
Position the cursor on the required empty magazine location.
3.
Press the "Load" softkey.
The "Load with" window opens.
4.
Select the required multitool.
5.
Press the "OK" softkey.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
