Settings For Teach-In - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Teaching in a program
14.5 Settings for teach-in
14.5
Settings for teach-in
In the "Settings" window, you define which axes are to be included in the teach-in block and
whether motion-type and continuous-path mode parameters are to be provided.
Procedure
386
1.
Teach-in mode is active.
2.
Press the ">>" and "Settings" softkeys.
The "Settings" window opens.
3.
Under "Axes to be taught" and "Parameters to be taught", select the check
boxes for the desired settings.
4.
Press the "Accept" softkey to confirm the settings.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
