Siemens SINUMERIK 840D sl Universal Operating Manual page 297
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Procedure
Multiple load points
For a magazine, if more than one loading point was set-up, using the "Select loading point"
softkey, you have the option of opening a window in which you can assign a loading point to a
magazine.
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1.
The magazine list is open.
2.
Press the "Delete all" softkey.
- OR -
Press the "Unload all" softkey.
- OR -
Press the "Load all" softkey.
- OR -
Press the "Relocate all" softkey.
A prompt is displayed as to whether you really want to delete, unload, load
or relocate all tools.
3.
Press the "OK" softkey to continue with deleting, unloading, loading or
relocation of the tools.
The tools are deleted, unloaded, loaded or relocated in the magazine in
ascending magazine location number order.
4.
Press the "Cancel" softkey if you wish to cancel the unloading operation.
Tool management
12.8 Magazine
297
Advertisement
Table of Contents
