Calling The Input Screen; Blank Input - Siemens SINUMERIK 840D sl Universal Operating Manual

9.6.2

Calling the input screen

Procedure
9.6.3

Blank input

Parameter Description
Data for Selection of the spindle for blank
• Main spindle
• Counterspindle
Note:
If the machine does not have a counterspindle, then the entry field "Data for" is not applicable.
Clamping Selecting the clamping location of the blank
• Table
All clampings are mounted on a table
Note: No turning cycles can be used in the program with the "Table" selection.
• C1...
All clampings are mounted on a rotary axis
Note: please refer to the machine manufacturer's specifications.
Blank Selecting the blank
• Cuboid
• Tube
• Cylinder
• Polygon
• Centered cuboid
• Delete
X0 1. Rectangular point X - (only for cuboid)
Y0 1. Rectangular point Y - (only for cuboid)
X1 2. Rectangular point X (abs) or 2nd rectangular point X referred to X0 (inc) - (only for cuboid)
Y1 2. Rectangular point Y (abs) or 2nd rectangular point Y referred to Y0 (inc) - (only for cuboid)
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1. Select the "Program" operating area.
2. Press the "Misc." and "Blank" softkeys.
The "Blank Input" window opens.
Creating a G code program
9.6 Blank input
Unit
245