Siemens SINUMERIK 840D sl Universal Operating Manual page 192
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Machining the workpiece
7.16 Settings for the automatic mode
Note
Please observe the information provided by the machine manufacturer.
Save machining times
You define how the machining times determined are processed.
• Yes
A subdirectory with the name "GEN_DATA.WPD" is created in the directory of the part
program. The machining times determined are saved in an ini file in the subdirectory,
together with the name of the program.
• No
The machining times that have been determined are only displayed in the program block
display.
Record tools
You define whether the tool data is recorded.
• Yes
Recording takes place during processing. The data is stored in a TTD file (Tool Time Data). The
TTD file is located in the directory of the associated part program.
• No
The tool data is not recorded.
Procedure
192
1.
Select the "Machine" operating area.
2.
Press the <AUTO> key.
3.
Press the menu forward key and the "Settings" softkey.
The "Settings for Automatic Operation" window opens.
4.
In "DRY run feedrate," enter the desired dry run speed.
5.
Enter the desired percentage in the "Reduced rapid traverse RG0" field.
RG0 has no effect if you do not change the specified amount of 100 %.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
