Siemens SINUMERIK 840D sl Universal Operating Manual page 251
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Switching between single- and multi-channel view
Editing a program in the block display
If there is not sufficient space, you switch over into the single-channel view.
Running-in a program
You select individual channels to run-in the program at the machine.
Requirement
• Several channels have been set-up.
• The setting "2 channels", "3 channels" or "4 channels" is selected.
Displaying/hiding a multi-channel view
...
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
10.2 Multi-channel view in the "Machine" operating area
Press the <MACHINE> key in order to briefly switch between the single-
and multi-channel view in the machine area.
Press the <NEXT WINDOW> key in order to switch between the upper and
lower window within a channel column.
You can perform simple editing operations as usual with the <INSERT>
key in the actual block display.
1.
Select the "Machine" operating area
2.
Select the "JOG", "MDA" or "AUTO" mode.
3.
Press the menu forward key and the "Settings" softkey.
4.
Press the "Multi-channel view" softkey.
Multi-channel view
251
Advertisement
Table of Contents
