Siemens SINUMERIK 840D sl Universal Operating Manual page 397

Press the menu forward key to extend the horizontal user softkey bar. This means that additional
softkeys are available.
Softkeys on the machine control panel menu
Available softkeys:
SF1- SF4, U1- 8
"WCS MCS" softkey
"Single Block" softkey
Note
The window will automatically disappear when changing regions areas with the <MENU
SELECT> key.
Axis selection
You select an axis in the actual value window by activating the checkbox in the header line of the
actual value window.
By tapping the check box, a check box is displayed next to the axis name of the axis that has been
enabled for axis selection.
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Customer keys, can be labeled in the local language
Switching between WCS and MCS
Switch single block execution on/off
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Handheld terminal for multi-touch-operation
15.2 HT 10
397