Displaying Status Of Synchronized Actions - Siemens SINUMERIK 840D sl Universal Operating Manual

7.14

Displaying status of synchronized actions

You can display status information for diagnosing synchronized actions in the "Synchronized
Actions" window.
You get a list with all currently active synchronized actions.
In this list, the synchronized action programming is displayed in the same form as in the part
program.
Synchronized actions
Status of synchronized actions
You can see the status of the synchronized actions in the "Status" column.
• Waiting
• Active
• Blocked
Non-modal synchronized actions can only be identified by their status display. They are only
displayed during execution.
Synchronization types
Synchronization types
ID=n
IDS=n
Without ID/IDS
Note
Numbers from the number range 1 to 254 can only be assigned once, irrespective of the
identification number.
Display of synchronized actions
Using softkeys, you have the option of restricting the display to activated synchronized actions.
Further information: Synchronized Actions Function Manual
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Meaning
Modal synchronized actions in the automatic mode up to the end of program, local to pro‐
gram; n = 1... 254
Static synchronized actions, modally effective in every operating type, also beyond the end
of program; n = 1... 254
Non-modal synchronized actions in the automatic mode
Machining the workpiece
7.14 Displaying status of synchronized actions
187