Storing Any New File - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Managing programs
13.4 Creating a directory/program/job list/program list
13.4.5
Storing any new file
In each directory or subdirectory you can create a file in any format that you specify.
Note
File extensions
In the NC memory, the extension must have 3 characters, and DIR or WPD are not permitted.
In the NC memory, you can create the following file types under a workpiece using the "Any"
softkey.
Procedure
332
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder
in which you would like to create the file.
3.
Press the "New" and "Any" softkeys.
The "Any New Program" window opens.
4.
Select a file type from the "Type" selection field (for example, "Definitions
GUD") and enter the name of the file to be created when you have selected
a workpiece directory in the NC memory.
The file automatically has the selected file format.
- OR -
Enter a name and file format for the file to be created (e.g. My_Text.txt).
5.
Press the "OK" softkey.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
