Siemens SINUMERIK 840D sl Universal Operating Manual page 36

Fundamentals
3.2 Operator panel fronts
36
<ALT> + <S>
Opens the editor to enter Asian characters.
<ALT> + <Cursor up>
Moves the block start or block end up in the editor.
<ALT> + <Cursor down>
Moves the block start or block end down in the editor.
<DEL>
• Editing box
Deletes the first character to the right of the cursor.
• Navigation
Deletes all characters.
<DEL> + <CTRL>
• Editing box
Deletes the first word to the right of the cursor.
• Navigation
Deletes all characters.
<Spacebar>
• Editing box
Inserts a space.
• Switches between several specified options in selection lists and
in selection boxes.
<Plus>
• Opens a directory which contains the element.
• Increases the size of the graphic view for simulation and traces.
<Minus>
• Closes a directory which contains the element.
• Reduces the size of the graphic view for simulation and traces.
<Equals>
Opens the calculator in the entry fields.
<Asterisk>
Opens a directory with all of the subdirectories.
<Tilde>
Changes the sign of a number between plus and minus.
<INSERT>
• Opens an editing window in the insert mode. Pressing the key
again, exits the window and the entries are undone.
• Opens a selection box and shows the selection possibilities.
• In the machining step program, enters an empty line for G code.
• Changes into the double editor or into the multi-channel view
from the edit mode into the operating mode. You can return to
the edit mode by pressing the key again.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal