Siemens SINUMERIK 840D sl Universal Operating Manual page 353

Note
If you change the language when viewing a PDF document, the PDF document is reloaded in the
respective language. If no PDF document is available for the language set, the English PDF
document is displayed.
The position in the PDF document is retained beyond language switchover across sessions if the
PDF document contains bookmarks.
Changing the display
Copying text
Closing the PDF
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
7. Press the "Continue search" softkey if the text that is found is not the
specific text that you are looking for.
8. Press the "Back" softkey to return to the higher-level softkey bar.
1. Press the "View" softkey to change the representation of the PDF.
A new vertical softkey bar is displayed.
2. Press the "Zoom page width" softkey to display the document in full width
on the screen.
- OR -
Press the "Zoom page length" softkey to display the document with full
height on the screen.
- OR -
Press the "Rotate left" softkey to rotate the document through 90 degrees
to the left.
- OR -
Press the "Rotate right" softkey to rotate the document through 90 de‐
grees to the right.
3. Press the "Back" softkey to return to the higher-level softkey bar.
1. Press the "Mark" softkey.
The "Copy" softkey can be used.
2. Select the required text either by touching or with the mouse.
3. Press the "Copy" softkey.
"The marked text is available for insertion in the editor"
4. Press the "Mark" softkey again to shift the displayed section by touching.
The "Copy" softkey cannot be used.
1. Press the "Close" softkey to close the PDF.
Managing programs
13.13 Viewing PDF documents
353