Display Active Zero Offset - Siemens SINUMERIK 840D sl Universal Operating Manual

Setting up the machine
5.5 Zero offsets
You can save the workpiece zero, for example, in the coarse offset, and then store the offset that
occurs when a new workpiece is clamped between the old and the new workpiece zero in the
fine offset.
Note
Deselect fine offset
You have the option of deselecting the fine offset using machine data MD18600
$MN_MM_FRAME_FINE_TRANS
5.5.1

Display active zero offset

The following zero offsets are displayed in the "Zero Offset - Active" window:
• Zero offsets, for which active offsets are included, or for which values are entered.
• Settable zero offsets
• Total zero offset
This window is generally used only for monitoring.
The availability of the offsets depends on the setting.
Procedure
Note
Further details on zero offsets
If you would like to see further details about the specified offsets or if you would like to change
values for the rotation, scaling or mirroring, press the "Details" softkey.
108
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Zero offset" softkey.
The "Zero Offset - Active" window is opened.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal