Softkeys on the machine control panel menu
Available softkeys:
"Machine" softkey
"[VAR]" softkey
"1... n CHANNEL"
softkey
"Single Block" soft‐
key
"WCS MCS" softkey Switch between WCS and MCS
"Back" softkey
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Press the menu forward key to extend the horizontal user softkey bar. There are
8 additional softkeys available.
You use the "Back" softkey to hide the menu bar again
Select the "Machine" operating area
Select the axis feedrate in the variable increment
Changing the channel
Switch single block execution on/off
Close window
Handheld terminal for multi-touch-operation
15.1 HT 8
391