Tool Data - Siemens SINUMERIK 840D sl Universal Operating Manual

Tool management
12.9 Tool details
Parameter
For driven tools (drills and milling tools)
Direction of
spindle rotation
Cutting edge OEM
parameters 1 - 2
12.9.3

Tool data

The "Tool Details" window provides the following data on the selected tool when the "Tool data"
softkey is active.
Parameter
Magazine location
Tool name
ST
D quantity
D
Tool state
Tool size
300
Meaning
Spindle is not switched on
CW spindle rotation
CCW spindle rotation
Coolant 1 and 2 (e.g. internal and external cooling) can be switched on and off.
Please refer to the machine manufacturer's specifications
Software option
In order to be able to manage the parameter spindle direction of rotation, coolant and
tool-specific functions (M1-M4), you require the "ShopMill/ShopTurn" option.
Meaning
The magazine number is specified first, followed by the location number in the magazine.
If there is only one magazine, only the location number is displayed.
The tool is identified by the name and the sister tool number. You can enter the name as text or
number.
Sister tool number (for sister tool strategy)
Number of created cutting edges
Cutting edge number
A Activate tool
F Tool enabled
G Block tool
M Measure tool
V Reaching the prewarning limit
W Tool being changed
P Tool in fixed location
The tool is permanently assigned to this magazine location
I Tool has been in use
Standard Tool does not require an additional location in a magazine.
Oversize The tool occupies two half locations left, two half locations right, one half
location top and one half location bottom in a magazine.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal