Siemens SINUMERIK 840D sl Universal Operating Manual page 294

Tool management
12.8 Magazine
Further parameters
If you have created unique cutting edge numbers, they will be displayed in the first column.
Column heading
D no.
SN
Magazine list icons
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing down‐
ward
Yellow triangle pointing up‐
ward
Green border
Magazine/location number
Green double arrow
Gray double arrow (configura‐
ble)
Red "X"
Procedure
See also
Changing a tool type (Page 302)
294
Meaning
Unique cutting edge number
Cutting edge number
1. Select the "Parameter" operating area.
2. Press the "Magazine" softkey.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides
a short description.
The tool is preselected.
The magazine location is positioned at the change
position.
The magazine location is positioned at the loading
position.
The magazine location is disabled.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal