Deleting A Zero Offset - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
...
These value changes are available in the part program immediately or after "Reset".
5.5.6
Deleting a zero offset
You have the option of deleting work offsets. This resets the entered values.
Procedure
...
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
6.
You can edit the values directly in the table.
- OR -
Press the "Clear offset" softkey to reset all entered values.
Press the "ZO +" or "ZO -" softkey to select the next or previous offset,
respectively, within the selected area ("Active", "Base", "G54 to G599")
without first having to switch to the overview window.
If you have reached the end of the range (e.g. G599), you will switch
automatically to the beginning of the range (e.g. G54).
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Press the "Back" softkey to close the window.
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "Overview", "Basis" or "G54...G599" softkey.
4.
Press the "Details" softkey.
5.
Position the cursor on the work offset you would like to delete.
Setting up the machine
5.5 Zero offsets
113
Advertisement
Table of Contents
