Working in manual mode
6.1
General
Always use "JOG" mode when you want to set up the machine for the execution of a program or
to carry out simple traversing movements on the machine:
• Synchronize the measuring system of the controller with the machine (reference point
approach)
• Set up the machine, i.e. activate manually-controlled motions on the machine using the keys
and handwheels provided on the machine control panel.
• You can activate manually controlled motions on the machine using the keys and
handwheels provided on the machine control panel while a part program is interrupted.
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
6
125