Deleting / Unloading / Loading / Relocating All Tools - Siemens SINUMERIK 840D sl Universal Operating Manual

Tool management
12.8 Magazine
Several magazines
If you have set up several magazines, then the "...relocate from magazine... location... to..."
window appears after pressing the "Relocate" softkey.
Select the desired magazine and location, and confirm your selection with "OK" to load the tool.
12.8.3

Deleting / unloading / loading / relocating all tools

You have the option of deleting or unloading all tools in the magazine list, loading them into the
magazine list or relocating them in the magazine list. With one task, the tools are deleted or
unloaded from the list or loaded, relocated in the list.
Requirement
The following requirements must be satisfied so that the "Delete all", "Unload all", "Load all" or
"Relocate all" softkey is displayed and available:
• Magazine management is set up
• There is no tool in the buffer / in the spindle
296
3. Press the "Relocate" softkey.
The "... relocate from location ... to location ..." window is displayed. The
"Location" field is pre-assigned with the number of the first empty maga‐
zine location.
4. Press the "OK" softkey to relocate the tool to the recommended magazine
location.
- OR -
Enter the required magazine, enter the location number and press the
"OK" softkey.
- OR -
Enter the number "9998" or the number "9999" into the "... magazine"
field in order to select the buffer as well as the required buffer location in
the "Location" field.
- OR -
Press the "Spindle" softkey to load a tool into the spindle and press the
"OK" softkey.
The tool is relocated to the specified magazine location, in the spindle or
in the buffer.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal