Selecting A Tool - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Parameter
Meaning
Gear stage
Specification of the gear stage (auto, I - V)
Stop position
Entering the spindle position
Note
Spindle positioning
You can use this function to position the spindle at a specific angle, e.g. during a tool change.
• A stationary spindle is positioned via the shortest possible route.
• A rotating spindle is positioned as it continues to turn in the same direction.
6.2.2
Selecting a tool
Procedure
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1.
Select the "JOG" operating mode.
2.
Press the "T, S, M" softkey.
3.
Enter the name or the number of the tool T in the input field.
- OR -
Press the "Select tool" softkey.
The tool selection window opens.
Place the cursor on the desired tool and press the "OK" softkey.
The tool is transferred to the "T, S, M... window" and displayed in the field
of tool parameter "T".
4.
Select tool edge D or enter the number directly in field "D".
5.
Select the sister tool ST or enter the number directly into the "ST" field
6.
Press the <CYCLE START> key.
The tool is loaded into the spindle.
Working in manual mode
6.2 Selecting a tool and spindle
Unit
degrees
127
Advertisement
Table of Contents
