Siemens SINUMERIK 840D sl Universal Operating Manual page 68

Fundamentals
3.4 Operator interface
Searching for a topic
Displaying alarm descriptions and machine data
68
1. Press the "Table of contents" softkey.
Depending on which technology is set, help is displayed for "Operate
Milling", "Operate Turning", "Operate Grinding", or "Operate Universal" -
as well as on the topic of "Programming".
2. Select the desired Chapter with the <Cursor down> and <Cursor up> keys.
3. Press the <Cursor right> or <INPUT> key or double-click to open the sec‐
tion.
4. Navigate to the desired topic with the "Cursor down" key.
5. Press the <Follow reference> softkey or the <INPUT> key to display the
help page for the selected topic.
6. Press the "Current topic" softkey to return to the original help.
1. Press the "Search" softkey.
The "Search in Help for: " window appears.
2. Activate the "Full text " checkbox to search in all help pages.
If the checkbox is not activated, a search is performed in the table of
contents and in the index.
3. Enter the desired keyword in the "Text" field and press the "OK" softkey.
If you enter the search term on the operator panel, replace an umlaut
(accented character) by an asterisk (*) as dummy.
All entered terms and sentences are sought with an AND operation. In this
way, only documents and entries that satisfy all the search criteria are
displayed.
4. Press the "Keyword index" softkey to display the index.
1. If messages or alarms are active in the "Alarms", "Messages" or "Alarm Log"
window, position the cursor at the appropriate display and press <HELP>
or key <F12>
The associated alarm description is displayed.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal