Calling The Blocks In The Project - Siemens SIPLUS HCS4 00 Series Configuration

5 How to Work with the Library
5.2 Integrating the library blocks in the project
5.2.3

Calling the blocks in the project

Main [OB1]
The "LHcs4x00_Control" function block is called in cycle OB 1 "Main".
Move the block into OB "Main" and generate an instance block for the FB.
Figure 5-4
Then interconnect the interface parameters according to the specification in
4-2.
HCS4x00Library
Entry ID: 109478117, V2.2.1, 09/2018
Figure
47