Installing The Front Brake Disc; Changing The Front Wheel Bearing - Husqvarna FE 350 2015 Repair Manual

WHEELS
14
14.6.4

Installing the front brake disc

14.6.5

Changing the front wheel bearing

Main work
0-
-
Remove screws Take off the brake disc.
Main work
-
Clean the contact surface of the brake disc.
-
Position the brake disc with the label facing outward. Mount and tighten
O.
screws
Guideline
Screw, front brake disc
Finishing work
-
Install the front wheel. (I!:!
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
-
Remove shaft seal rings
8
-
Press out bearing using a suitable tool.
• Info e
I
Spacing tube
-
Remove the spacing tube.
0
-
Press out bearing using a suitable tool.
-
Press in the new bearing
• Info
I
Only press the bearing in via the outer ring otherwise the bearing will be
damaged when it is pressed in.
M6
14 Nm
(10.3 lbf ft)
p. 94)
(!!.,!I p. 11)
(!!.,!I p. 93)
O 8.
and
can be pushed aside.
0
all the way using a suitable tool.
95
Loctite ® 243 ™