Husqvarna FE 350 2015 Repair Manual page 60

SHOCK ABSORBER, SWINGARM
9
Install the seal ring bearer
0.
Mount lock ring
• Info
I
Do not scratch the inner surface.
Pull out the piston rod so that the seal ring retainer rests against the lock ring.
Mount locking cap (3 of the damper cartridge.
Bleed and fill the damper.
Fill the damper with nitrogen.(� p. 61)
Mount rubber cap @ of the reservoir.
Alternative 1
Turn adjusting screw Ci) clockwise with a screwdriver up to the last percepti­
ble click.
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping, low-speed
Comfort
Standard
Sport
Turn adjusting screw
Turn counterclockwise by the number of turns corresponding to the shock
absorber type.
Guideline
Compression damping, high-speed
Comfort
Standard
Sport
Turn adjusting screw
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort
Standard
Sport
8
and push it under the ring groove.
(� p. 59)
20 clicks
18 clicks
16 clicks
@)
all the way clockwise with a socket wrench.
2.5 turns
2 turns
1.5 turns
4l&
clockwise up to the last perceptible click.
20 clicks
18 clicks
16 clicks
58