Installing The Stator And Ignition Pulse Generator - Husqvarna FE 350 2015 Repair Manual

22
IGNITION SYSTEM
22.5
Installing the stator and ignition
Blow out oil nozzle
Guideline
Oil nozzle for alternator
cooling
305322-10
Position the stator in the alternator cover.
Mount and tighten screws
Guideline
Screw, stator
305321-11
Position cable retainer plate@).
Position cable support sleeve in the alternator cover.
Position the ignition pulse generator with the cable retainer plate in the alternator
cover.
Position the retaining bracket.
Mount and tighten screws
Guideline
Screw, crankshaft posi­
tion sensor
305319-11
enerator
O
with compressed air and check that it is clear.
M4
8.
M5
8.
M5
2Nm Loctite 243
®
(1.5 lbf ft)
6Nm Loctite 243
®
(4.4 lbf ft)
6Nm Loctite 243
®
(4.4 lbf ft)
209
™
™
™