Checking For Chain Dirt Accumulation; Cleaning The Chain - Husqvarna FE 350 2015 Repair Manual

WHEELS
14
14.7.8

Checking for chain dirt accumulation

14.7.9

Cleaning the chain

Warning
Danger of accidents
-
Remove the lubricant from the tires using a suitable cleaning agent.
A
Warning
Danger of accidents
-
Always keep the brake discs free of oil and grease.
-
Clean the brake discs with brake cleaner when necessary.
Warning
Environmental hazard
-
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable
regulations.
Info
The service life of the chain depends largely on its maintenance.
-
Check the chain guide for wear.
• Info
I
Wear can be seen on the front of the chain guide.
If the light part of the chain guide is worn:
-
Change the chain guide.
-
Check that the chain guide is firmly seated.
If the chain guide is loose:
-
Tighten the chain guide.
Guideline
Remaining screws, chassis
Remaining nuts, chassis
Finishing work
-
Remove the motorcycle from the lift stand.(� p. 11)
-
Check the chain for coarse dirt accumulation.
If the chain is very dirty:
-
Clean the chain.
400678-01
Oil or grease on the tires reduces the road grip.
Oil or grease on the brake discs reduces the braking effect.
Hazardous substances cause environmental damage.
Preparatory work
-
Raise the motorcycle with a lift stand.(� p. 11)
M6
M6
(� p. 1 01)
101
10 Nm
(7.4 lbf ft)
10 Nm
(7.4 lbf ft)